Crankshaft

GENERAL SPECIFICATIONS
Main Bearing Journal Diameter 63.983-64.003 mm (2.5190-2.5198 in.)
Out of Round Limit 0.008 mm (0.0003 in.) Max. in 45°, 0.015 mm (0006 in.) Total
Taper Limit 0.008 mm (0.003 in.) per 25 mm (1 in.)
Journal Runout Limit 0.05 mm (0.002 in.) (1)(2)
Thrust Bearing Journal Length 29.725-29.775 mm (1.703-1.1722 in.)
Connecting Rod Journal
Diameter 58.682-58.702 mm (2.3103-2.3111 in.)
Out-of-Round Limit 0.008 mm (0.0003 in.) Max. in 45°, 0.015 mm (0.0006 in.) Total
Taper Limit 0.008 mm per 25 mm (0.0003 in. per in.)
Surface Limit (RMS) 0.3 Micrometers (11.8 Micro In.)
Crankshaft End Play 0.10-0.20 mm (0.004-0.008 in.)

(1) Runout of journals No. 2 and No. 3 to journals No.1 and No.4
(2) Runout of adjacent journals to each other