Multifunction Switch

The multi-function switch, which is mounted to the steering column lock cylinder housing, provides electrical switching for:
^ turn signal.
^ headlamp dimmer.
^ headlamp flash-to-pass.
^ hazard warning.
^ cornering lamps.
^ windshield washer/wiper.

The windshield washer switch, located at the end of the turn signal lever, operates as follows:
^ The ignition switch lock cylinder must be in RUN position to operate washer.
^ Push the end of the turn signal lever in toward the center of the steering actuator housing to actuate the washer.
^ Release the end of the turn signal lever to turn off the washer.
^ The windshield wipers will continue to operate briefly and then automatically return to the previous wiper speed setting (OFF, LO, HI or INT).