Connecting Rod
| Connecting Rod Bearings Clearance to Crankshaft | 0.020-0.065 | ||
| Bearing Wall Thickness (STD) | 1.476-1.488 | ||
| Clearance Of Crankshaft | W/O Cylinder Head | Desired | 0.0457-0.0660 |
| Allowable | 0.0461-0.0859 | ||
| W/ Cylinder Head | Desired | 0.0279-0.0483 | |
| Allowable | 0.0276-0.0674 | ||
| Bearing Wall Thickness | 2.117-2.129 | ||
| Connecting Rod Piston Pin Bore | Diameter | 20.570-20.610 | |
| Out Of Round | Limit | 0.008 | |
| Taper | Limit | 0.0038/25.4 | |
| Crankshaft Bearing Bore Diameter | 46.89-46.91 | ||
| Length (Center to Center) | 131.905-131.975 | ||
| Out-Of-Round | Bearing Bore | 0.010 | |
| Taper Limit | Bearing Bore | 0.010 | |
| Alignment Bore To Bore (Max Differential) | Twist | 0.05 | |
| Bend | 0.038 | ||
| Side Clearance (Assembled To Crank) | STD | 0.092-0.268 | |
| Service Limit | 0.356 | ||
| Connecting Rod Bearing Bolts | Stage 1 | 25 | |
| Stage 2 | 90 Degrees |