Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1999 >> F 150 2WD Pickup V8-4.6L SOHC VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Cable: Service and Repair

REMOVAL

CAUTION: Spark plug wires must be connected to the proper ignition coil terminal and spark plug. Mark the spark plug wire locations.

NOTE: Procedure is the same for all spark plug wires.

1. With a twisting, pulling motion, disconnect the spark plug wire from the spark plug.







2. Squeeze the (A) locking tabs and disconnect the (B) spark plug wire from the (C) ignition coil.

INSTALLATION

CAUTION: Spark plug wires must be connected to the proper ignition coil terminal and spark plug.

1. Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A meeting Ford specification ESE-M1C171-A or equivalent to the inside of the spark plug wire boots.
2. Follow the removal procedure in reverse order.
pro multis · About Operation CHARM