General Module: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.







2. Remove the [1][2][3][4]generic electronic module.
1. Remove the five electrical connectors.
2. Release the locking tab and slide the module off the bracket.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 10 mile 5 (16 km) or more to relearn the strategy.