Alignment: Specifications

CAMBER:
Nominal -0.50°
Tolerance ±0.75°
Difference (Left Minus Right)
Nominal 0.00°
Tolerance ±0.75°

CASTER:
Nominal +3.20°
Tolerance ±0.75°
Difference (Left Minus Right)
Nominal 0.00°
Tolerance ±0.75°

TOTAL TOE DEGREE [a]:
Nominal +0.25°
Tolerance ±0.25°

CLEAR VISION [b]:
Nominal -2.0°
Tolerance ±3.0°

DOGTRACKING
Maximum 13 mm (0.5 inch)

VEHICLE HEIGHT - Base & GT
Ride Height
Front 4 ±7.6 mm (0.2 ±0.3 inch)
Rear 128 mm (5 inch)
Attitude (Front to Rear Height Difference)
Maximum 19 mm (0.75 inch)
Lean, Max (Right to Left Height Difference)
Front 13 mm (0.5 inch)
Rear 13 mm (0.5 inch)

VEHICLE HEIGHT - Cobra
Ride Height
Front 4 ±7.6 mm (0.2 ±0.3 inch)
Rear 36.3 ±7.6 mm (1.4 ±0.3 inch)
Attitude (Front to Rear Height Difference)
Maximum 19 mm (0.75 inch)
Lean, Max (Right to Left Height Difference)
Front 13 mm (0.5 inch)
Rear 13 mm (0.5 inch)

[a] Positive value specification for toe is toe-in, negative value specification for toe is toe-out.
[b] Negative value specification for clear vision is counterclockwise.

NOTE: Specifications are for left and right sides unless noted.