Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1999 >> Ranger 2WD V6-3.0L VIN U >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Programming A New Restraints Control Module (RCM)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming A New Restraints Control Module (RCM)

When installing a new Restraints Control Module (RCM) it must be programmed for the applicable vehicle configuration. Program the RCM using the following procedure.
1. Make sure that all of the Supplemental Restraint System (SRS) components are installed in the vehicle and the battery is connected.
2. Insert the FSF card in the New Generation Star (NGS) Tester.
3. Connect the NGS to the Data Link Connector (DLC).
4. Key to RUN.
5. On the NGS select "Service Bay Functions".
6. Select - "RCM-Restraints Control Module".
7. Select:
- "Airbag Configuration 14" for Ranger with Passenger Airbag Deactivate Switch.
- "Airbag Configuration 15" for Range without Passenger Airbag Deactivate Switch.
8. Wait for a process complete confirmation.
9. Key to OFF.
10. Prove out the system.
pro multis · About Operation CHARM