Power Mirror Motor: Service and Repair

Mirror Motor Removal And Installation:

REMOVAL
1. Remove outside rear view mirror glass.
2. Remove three Torx (R) T-10 screws retaining outside rear view mirror motor to housing.
3. Pull outside rear view mirror motor outward until wire connectors are exposed.
4. Disconnect electrical connector from outside rear view mirror motor.
5. Remove outside rear view mirror motor from housing.

INSTALLATION
1. Connect electrical connector to outside rear view mirror motor.
2. Reposition outside rear view mirror motor over mounting bosses in mirror housing.
3. Install three Torx (R) T-10 screws retaining outside rear view mirror motor to mirror housing to 6-8 Nm (54-70 lb-in).
4. Install outside rear view mirror.