Outside Rear View Mirror

REMOVAL
1. Disconnect battery ground cable.
2. Remove front door trim panel.
3. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
4. Remove two screws from cover assembly.
5. Disconnect outside rearview mirror wiring connector. Remove wiring guides as necessary.
6. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror while guiding wiring and connector through hole in door.

INSTALLATION
1. Install outside rear view mirror by routing connector and wiring through hole in front door. Install three retaining nuts. Tighten retaining nuts to 6-8 Nm (54-70 lb-in).
2. Connect mirror wiring.
3. Install cover assembly to front door with two retaining screws.
4. Snap radio speaker grille cover on cover assembly.
5. Replace front door trim panel.
6. Connect battery ground cable.