With Power Sliding Door

REMOVAL
1. Remove the sliding door trim panel.







2. Remove the screws.







3. Release the cable.
1. Release the cable housing.
2. Release the cable.







4. Release the clip.







5. Remove the remote control assembly.
1. Remove the screws.
2. Slide the door latch push button rod through the strap.







6. Disconnect the connectors.







7. Remove the screws.







8. Disconnect the connector.







9. Remove the switch.







10. Remove the actuator.







11. Remove the rods.

INSTALLATION

















1. To install, reverse the removal procedure.