Right

REMOVAL
1. Remove CJB fuse 6 (15 A).
2. Remove the right quarter trim panel.







3. Disconnect the connectors.







4. Remove the bolts.







5. Position the motor assembly forward.







6. Remove the sensor.

INSTALLATION







1. Install the sensor.







2. Position and install the motor assembly.







3. Connect the connectors.
4. Install the right quarter trim panel.
5. Install CJB fuse 6 (15 A).
6. Initialize both of the power sliding doors.
^ Press the overhead console switch to open the left power sliding door to the full open position. Press the same switch to close the left power sliding door to the full closed position.
^ Press the overhead console switch to open the right power sliding door to the full open position. Press the same switch to close the right power sliding door to the full close position.

NOTE:
^ Make sure that the power sliding doors are fully closed and latched.
^ Make sure that the power sliding doors are unlocked.