Air Bag Control Module: Service Precautions
WARNING:- To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any front or side air bag Supplemental Restraint System (SRS) components and before servicing, replacing, adjusting or striking components near the front or side air bag sensors, such as doors, instrument panel. console, door latches, strikers, seats and hood latches.
- The side air bag sensors are located at or near the base of the B-pillar.
- To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies (if equipped).
- The tightening torque of the air bag Restraint Control Module (RCM) bracket retaining bolts is critical for correct system operation.