One_Touch Down

The one touch down driver window feature is controlled by the Front Electronic Module (FEM). When the driver window regulator control switch is actuated to an express down position (second detent), the FEM powers the window regulator until the window regulator control switch is actuated to a different position or the FEM detects the front door window glass is in the full down position. Pressing the window regulator control switch from the first detent position to the second detent position will not actuate the express down mode. The one touch function is halted if any of the following occurs:
- Seven seconds have passed since the command was issued.
- The down button is pressed.
- The up button is pressed
- One second after the FEM detects a stalled window motor.
- The ignition switch is not in RUN or ACC and the delayed accessory relay is de-energized.