Power Door Lock Switch: Service and Repair

REMOVAL

NOTE: Individual lock cylinders are repaired by discarding the inoperative lock cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.

1. Remove the door trim panel and watershield.







2. Rear door: remove the license plate housing screws, and pull the housing away from the door.







3. All doors: disconnect the lock cylinder-to-latch rod.







4. Remove the retainer, and remove the lock cylinder.

INSTALLATION
1. Follow the removal procedure in reverse order.