Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Cylinder Head Assembly
Engine General Specifications Tightening Specifications CAUTION: Install new bolts during installation. The bolts are tighten-to-yield designed and cannot be reused. Tighten the bolts in three stages, in the sequence shown.
LH is shown; RH is similar.
-
Stage 1: Tighten to
37 - 43 Nm (27 - 32 ft. lbs.). -
Stage 2: Tighten an additional
85 - 95 degrees. -
Stage 3: Tighten an additional
85 - 95 degrees.