Cable

REMOVAL







1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.







2. Remove the throttle body inlet duct from the throttle body.







3. Depress the tab and remove the accelerator control splash shield.







4. Disconnect the accelerator cable pushpin from the dash panel stud.







5. Remove the bolts and pull the cable through the bulkhead.







6. Disconnect the accelerator cable from the throttle body lever.
1 Rotate the throttle body lever forward.
2 Disconnect the accelerator cable.







7. Depress the locking tabs and remove the accelerator cable.
8. Remove the accelerator cable from the vehicle.

INSTALLATION












1. Follow the removal procedure in reverse order.