Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Connecting Rod Bolt/Nut
Note: The
connecting rod caps are of the "cracked" design and must mate with the connecting rod ends. Excessive bearing clearance will result if not mated correctly.
Position the lower bearing and
connecting rod, and install the new bolts loosely.
Tighten the bolts in two stages, in the sequence shown.
1.
Stage 1: Tighten to
40-45 Nm (30-33 ft. lbs.). 2.
Stage 2: Rotate
90-120 degrees.
