Low One-Way Clutch Assembly

Low/Reverse One-Way Clutch Assembly and Piston, Disassembled View

Disassembly and Assembly





1. Remove the output shaft ring gear and the No. 12 thrust bearing.
1. Remove the ring gear.
2. Remove the bearing.





2. If necessary, remove the low one-way clutch (17 roller) assembly by rotating it counterclockwise to unlock the tabs.
3. Inspect the following:
- Reverse clutch hub thrust surfaces for scores.
- Reverse clutch hub splines for wear.
- Outer and inner low/reverse one-way clutch race for scores and damaged surface areas where rollers contact races.
- Rollers and springs for excessive wear or damage.
- Spring and cage.
4. Follow the removal procedure in reverse order.