Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Excursion 4WD V10-6.8L VIN S >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Four Wheel Antilock Brake System (4WABS) >> Sensor, Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sensor, Front

Removal





1. Disconnect the battery ground cable.





2. Disconnect the front anti-lock brake sensor electrical connector.
3. Remove the front disc brake rotor.





4. CAUTION: Clean off debris that may have collected around the front anti-lock brake sensor before removal.

Remove the front anti-lock brake sensor.
1 Remove the front anti-lock brake sensor bolt and discard.
2 Remove the sensor.

Installation








1. CAUTION: Use care not to get dirt in the front hub.

Note: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mile) or more to relearn the strategy.

To install, reverse the removal procedure.
- Install a new front anti-lock brake sensor bolt.
pro multis · About Operation CHARM