Manual

DISASSEMBLY
1. Remove the front seat track. For additional information, refer to Seat-Track, Front Manual.







2. Remove the front seat cushion side shield screw.







3. Disconnect the pin-type retainer.







4. Remove the front seat cushion side shield.
- Unhook the front seat cushion side shield from the seat latch.







5. Remove the front seat backrest latch to seat cushion bolts.







6. Remove the front seat inboard pivot bolt and separate the seat cushion from the seat backrest.
- If equipped, feed the side air bag wiring harness through the opening in the seat cushion trim cover.

ASSEMBLY







1. Install the front seat inboard pivot bolt.
- If equipped, feed the side air bag wiring harness through the opening in the seat cushion trim cover.

NOTE: Be sure to install the seat pivot washer between the seat cushion and the seat backrest to allow for smooth operation of the seat backrest.







2. Install the front seat backrest latch to seat cushion bolts.







3. Hook the front seat cushion side cover to the clips.







4. Install the pin-type retainer.







5. Install the front seat cushion side shield screw.
6. Install the manual front seat track. For additional information, refer to Seat-Track, Front Manual.