Suspension Control Module: Service and Repair
Removal1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Note: Ride heights must be reset for the air suspension module whenever the air suspension module is replaced.
Disconnect the battery negative ground cable.
2. Remove the center instrument panel finish panel.
1 Remove the center instrument panel finish panel screws.
2 Disconnect the electrical connectors and remove the center panel finish panel.
3. Remove the air suspension control module.
1 Remove the air suspension control module screws.
2 Slide the air suspension control module down and out of the support bracket.
4. Disconnect the air suspension control module electrical connectors and remove the air suspension control module.
Installation
1. Note: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Note: When installing a new air suspension control module, ride height adjustment must be performed. Ride Height Adjustments
To install, reverse the removal procedure.