Wiper Motor Linkage: Service and Repair

REMOVAL







1. Cycle the windshield wiper blades to the vertical position.
2. Remove the cowl top vent panels.







3. Unsnap the wiper motor clip from the RH mounting arm and pivot shaft.







4. Disconnect the RH windshield wiper mounting arm and pivot shaft from the LH windshield wiper mounting arm and pivot shaft and move both away from the windshield wiper motor.







5. Remove the RH and LH mounting arm and pivot shafts.
1 Remove the two nuts.
2 Remove the mounting arm and pivot shafts.

INSTALLATION







1. Install the RH and LH mounting arms and pivot shafts.
1 Position the mounting arm and pivot shafts into place.
2 Install the two nuts.







2. Install the clip onto the RH mounting arm and pivot shaft.

CAUTION: To avoid possible damage to the windshield wiper adapter and connecting arm clip, be sure the clip is fully seated before installing the adapter and connecting arm clip on the windshield wiper motor crank pin.







3. Install the LH windshield wiper mounting arm and pivot shaft onto the windshield wiper motor crank pin, and install the RH windshield wiper mounting arm and pivot shaft onto the wiper motor crank pin.
4. Install the cowl top vent panels.