Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
System Specifications
ENGINE GENERAL SPECIFICATIONS TIGHTENING SPECIFICATIONS Note: New bolts must be used.
Note: The head gaskets are not interchangeable and are marked for either right or left side use.
Position the cylinder head and gasket and install the new bolts in three steps:
1
Tighten to
34 Nm (25 ft. lbs.). 2
Tighten to
72 Nm (53 ft. lbs.). 3
Tighten an additional
90 degrees.
