Front

1 Of 2:

2 Of 2:

Front Disc Brake Components - 4x4


On AWD and 4x4 vehicles:
^ The disc brake caliper bolts to the front wheel knuckle.
^ A separate brake disc attaches to the wheel hub.
The disc brake caliper:
^ is a pin slider, dual piston type.
^ has two caliper pistons.
The caliper has a fluid inlet at the center of the housing. A square section seal fitted into an annular groove in the caliper bore seals against hydraulic pressure, while rubber boots seal the caliper pistons and caliper bore from contamination.
The brake disc shield:
^ bolts to the front wheel knuckle
^ protects the bearings and inboard surface of the brake disc.
The pads are:
^ contained within the front disc brake caliper anchor plate.
^ held to the front disc brake caliper anchor plate abutments by disc brake anti-rattle clips.