Rear Door Window Glass: Service and Repair

Heavy Duty Riverter:

SPECIAL SERVICE TOOL(S)

REMOVAL
1. Remove the rear door trim panel.







2. Remove the inside glass weatherstrip.







3. Drill out the window regulator arm to window glass rivets.







4. Remove the rear door window glass.

NOTE: Slide the glass through the outboard side of the rear door.

INSTALLATION







1. Position the rear door window glass.

NOTE: Slide the glass through the outboard side of the rear door.







2. Use Heavy Duty Riveter to install the window regulator arm to window glass rivets.







3. Install the inside glass weatherstrip.
4. Install the rear door trim panel.