Battery Cable: Service and Repair

REMOVAL
1. Disconnect the battery. Refer to Battery Disconnect. Battery Disconnect







2. Remove the junction block splash shield.







3. Disconnect the cable.
1 Remove the relay nuts.
2 Remove the ground bolt.







4. Remove the bolt.







5. Remove the starter motor solenoid terminal cover.







6. Disconnect the starter motor connections.
1 Remove the starter motor ground cable nut and disconnect the starter motor ground cable.
2 Remove the solenoid cable nut and disconnect the solenoid cable.
3 Remove the starter motor positive cable nut and disconnect the starter motor positive cable.







7. Remove the cables.

INSTALLATION
1. To install, reverse the removal procedure.