Key Release Button

Removal





1. Remove the ignition switch lock cylinder.
1 Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2 Insert a punch through the hole in the lower steering column shroud and push the ignition switch lock cylinder release tab while pulling out the ignition switch lock cylinder.





2. Twist the tilt wheel handle and shank and remove.





3. Release the four clips and remove the steering column opening cover.





4. Remove the upper and lower steering column shrouds.
1 Remove the three screws.
2 Remove the lower steering column shroud.
3 Remove the upper steering column shroud.





5. Remove the key release button.
1 Remove the bolt.
2 Remove the spring.
3 Remove the key release button.

Installation





1. To install, reverse the removal procedure.