Front Door Window Regulator: Service and Repair
Front Door Window RegulatorHeavy Duty Riverter:
SPECIAL SERVICE TOOL(S)
REMOVAL
1. Remove the door speaker. For additional information, refer to Speaker.
2. Remove the front door watershield.
3. Lower the window glass.
4. Remove the window glass to regulator nuts.
5. Raise the window glass to the full closed position.
6. Disconnect the front door window regulator motor electrical connector.
7. Remove the front door window regulator.
1 Remove the nuts.
2 Drill out the rivets.
3 Remove the window regulator.
8. If equipped, remove the bolts and the power window motor.
CAUTION: Prior to motor removal, make sure the regulator arms are in a fixed position to prevent counterbalance spring unwind.
INSTALLATION
1. To install, reverse the removal procedure.
^ Cycle the door glass to make sure the gears engage.
NOTE: Use the special tool to install the rivets.