Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

System Specifications

Engine General Specifications

Tightening Specifications

Install the cylinder head on the head gasket and loosely install the bolts.
- LH shown; RH similar.

Note: Be sure to tighten the bolts in three stages.

Tighten the LH bolts in the sequence shown.
- Stage 1: Tighten to 37-43 Nm (27 32 ft. lbs.).
- Stage 2: Tighten an additional 85 degrees to 95 degrees.
- Stage 3: Tighten an additional 85 degrees to 95 degrees.