Technician Safety Information
WARNING:^ ALWAYS POSITION THE VEHICLE ON A HARD LEVEL SURFACE. IF THE VEHICLE MUST BE JACKED UP ON A SOFT SURFACE USE LOAD SPREADING BLOCKS UNDER THE JACK. ALWAYS USE A CHOCK AT THE WHEEL DIAGONALLY OPPOSITE THE JACK. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
^ IF ONLY ONE DRIVE WHEEL IS ALLOWED TO ROTATE, SPEED MUST BE LIMITED TO 55 KM/H (35 MPH) INDICATED ON THE SPEEDOMETER SINCE ACTUAL WHEEL SPEED WILL BE TWICE THAT INDICATED ON THE SPEEDOMETER. SPEED EXCEEDING 55 KM/H (35 MPH) OR ALLOWING THE DRIVE WHEEL TO HANG UNSUPPORTED COULD RESULT IN TIRE DISINTEGRATION, DIFFERENTIAL FAILURE, CONSTANT VELOCITY JOINT AND HALFSHAFT FAILURE, WHICH COULD CAUSE SERIOUS PERSONAL INJURY AND EXTENSIVE VEHICLE DAMAGE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.