Camshaft, Engine
| Lobe lift intake | 6.23 Millimeter (mm) |
| Lobe lift exhaust | 6.23 Millimeter (mm) |
| Allowable lobe lift loss | 0.127 Millimeter (mm) |
| Theoretical valve maximum lift intake | 10.28 Millimeter (mm) |
| Theoretical valve maximum lift exhaust | 10.28 Millimeter (mm) |
| End play | 0.02-0.20 Millimeter (mm) |
| Service limit | 0.20 Millimeter (mm) |
| Journal to cylinder head bearing surface clearance | 0.03335-0.0835 Millimeter (mm) |
| Journal diameter standard | 45.7375-45.7625 Millimeter (mm) |
| Runout limit mm | 0.127 Millimeter (mm) runout of center bearing relative to bearing nos. 1 and 5 |
| Out-of-round limit | 0.08 mm |
| Camshaft drive assembled gear face runout crankshaft | 0.65 Millimeter (mm) |
| Camshaft drive assembled gear face runout camshaft | 0.275 Millimeter (mm) |
| Camshaft pulley bolt | 77 Foot Pound-Force (ft.lb) |
| Camshaft bore inside diameter no. 1, 2, 3, 4, 5 | 45.796-45.821 Millimeter (mm) |