Piston, Engine
| Diameter Measured at 31.5 mm from top of block. Measured at 43 mm from top of piston , at 90 degrees to the piston pin. | 0.0010 | |
| Coded Red 1 | 3.55 - 3.551 | |
| Coded Blue 2 | 3.55 - 3.551 | |
| Coded Yellow 3 | 3.551 - 3.552 | |
| Coated Piston-to-Bore Clearance | -0.002/+0.001 | |
| Pin Bore Diameter If applicable, measured vertically, +0.030 - 0.050 mm (0.001 - 0.002 inch) measured horizontally (oval pin bore) iSpecification in 90.200 mm diameter gauge. | 0.866 - 0.867 | |
| Ring Groove Width | Compression (Top) | 0.06 - 0.061 |
| Compression (Bottom) | 0.06 - 0.061 | |
| Oil Ring | 0.12 - 0.12 |