With Automatic Transmission

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Apply the parking brake.
3. Place the selector lever in the 1 position.







4. Remove the floor console finish panel.
- Disconnect the electrical connectors.
5. Open the floor console glove compartment.







6. Remove the floor console glove compartment bumpers.







7. Remove the floor console glove compartment storage bin.
1 Remove the screws.
2 Remove the floor console glove compartment storage bin.







8. Disconnect the floor console electrical connector.







9. Remove the floor console.
1 Remove the screws.
2 Remove the floor console.

INSTALLATION
1. To install, reverse the removal procedure.