Crankshaft, Engine
| Main Bearing Journal | Diameter 1, 2, 3 | 2.5190 - 2.5198 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) MAX in 45 degrees | |
| 0.0006 Inch (in) TOTAL | ||
| Taper Limit | 0.0003 per 1 Inch (in) | |
| Journal Runout Limit | 0.002 Inch (in) | |
| Surface Finish (RMS) | 11.8 Micro-Inches (micro-in) | |
| Thrust Bearing Journal | 1.703 - 1.722 inch | |
| Connecting Rod Journal | Diameter | 2.3103 - 2.3111 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) MAX in 45 degrees | |
| 0.006 Inch (in) TOTAL | ||
| Taper Limit | 0.0003 per 1 Inch (in) | |
| Surface Limit (RMS) | 11.8 Micro-Inches (micro-in) | |
| Crankshaft End Play | 0.004 - 0.008 Inch (in) |