Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Taurus V6-3.0L VIN U >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Lock Cylinder Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lock Cylinder Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. Refer to Battery.
2. Remove the door trim panel.
3. Remove the watershield.







4. Disconnect the latch lever from the door lock cylinder.
1 Remove the E-clip.
2 Disconnect the latch lever.







5. Remove the door disarm switch.
^ Disconnect disarm switch electrical connector.

NOTE: The door disarm switch can be installed in more than one position. Before removing the switch from the cylinder it may be necessary to mark the position of the switch in relation to the lock cylinder.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: The door disarm switch can be installed in more than one position. Use the reference marks applied in the removal procedure to index the new door disarm switch to the lock cylinder.
pro multis · About Operation CHARM