Evaporative System Service Port: Service and Repair

REMOVAL
1. Disconnect the evaporative emissions test port from the evaporative emission (EVAP) canister purge valve.
2. Disconnect the evaporative emissions test port from the EVAP canister purge outlet tube and remove the evaporative emissions test port from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.
^ Test the evaporative emissions system for leaks. For additional information, refer to Evaporative Emission System Leak Test. Evaporative Emission System Leak Test
^ Carry out the evaporative emissions repair verification drive cycle. For additional information, refer to Evaporative Emission Repair Verification Drive Cycle. Service and Repair