Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Taurus V6-3.0L VIN U >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Floor Shift
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Floor Shift

Removal
1. Remove the center console.
2. Disconnect the selector lever cable from the selector lever.





- Remove the selector lever cable from the transaxle range selector lever.





- Depress the tab on the selector lever cable and remove the cable from the selector lever housing.





3. Remove the rear air distribution duct, if necessary.
4. Disengage the rubber grommet from the bulk head.
- Working from the passenger compartment, pull the insulation back to access the rubber grommet.





5. Remove the selector lever cable from the manual lever.





6. Depressing the tabs, remove the selector lever cable from the transmission shift cable bracket.
7. Feed the selector lever cable inside the vehicle and remove.

Installation

1. Note: From inside the vehicle, feed the selector lever cable through the floor.

Follow the removal procedure in reverse order.
- Place the selector lever in OVERDRIVE, then attach the selector lever cable to the selector lever.
- Move the manual lever to OVERDRIVE, then install the selector lever cable onto the manual lever.
pro multis · About Operation CHARM