Driven Sprocket Support

Special Tools:

Special Tools:

Disassembly





1. Remove the Teflon(R) seal rings and the No. 5 thrust washer.





2. Note: If the driven sprocket bearing is damaged, install a new sprocket.

Using the special tools, remove the bearing.

Assembly





1. If removed, install a new driven sprocket bearing. Using an arbor press and the special tools, install a new driven sprocket bearing.





2. CAUTION: The seal rings must be installed correctly. Transaxle failure could result

Install new Teflon(R) seals and the No. 5 thrust washer.





3. Make sure that the seals are mated correctly.