Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Windstar V6-3.8L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shifter A/T: Service and Repair

Removal

1. WARNING: The electrical circuit necessary for the air bag system deployment is powered directly from the battery and a backup power supply. To avoid accidental deployment and possible personal injury, the battery positive cable must be disconnected for a minimum of one minute to de-energize the backup prior to removing any of the air bag system components.

Disconnect the battery ground cable.
2. Remove the upper and lower steering column shrouds.





3. Disconnect the transmission control switch connector.





4. Remove the transmission range selector lever boot.
5. Remove the selector lever pin.





6. Remove the selector lever and the clip.

Installation





1. Position the clip and the selector lever.





2. Note: Install a new selector lever pin whenever removed.

Install the selector lever pin.
3. Install the selector lever boot.





4. Connect the transmission control switch connector.
5. Install the upper and lower steering column shrouds.
6. Connect the battery.
pro multis · About Operation CHARM