Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2001 >> Excursion 2WD V10-6.8L VIN S >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> S5-47 ZF >> Seal-Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seal-Rear

Seal-Rear





Special Tool(s)

Removal

All vehicles

1. Raise and support the vehicle.
2. Remove and position the driveshaft aside.

Vehicles with 4-wheel drive
3. Remove the transfer case.





4. Using the special tools, remove and discard the output oil seal.





Vehicles with 2-wheel drive

5. Using the Rear Seal Remover and the Forcing Screw, remove the pinion flange.





6. Using the special tools, remove and discard the output oil seal.

Installation





Vehicles with 4-wheel drive

1. Using the special tool, install a new output oil seal.
^ Coat the outer diameter of the new seal with Gasket and Trim Adhesive F3AZ-1913508-AA or equivalent.
^ Coat the inner diameter of the new seal with MERCON Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent Ford specification MERCON.

2. Install the transfer case.





Vehicles with 2-wheel drive

3. Using the Rear Seal Replacer, install a new output oil seal.
^ Coat the outer diameter of the new seal with Gasket and Trim Adhesive F3AZ-1913508-AA or equivalent.
^ Coat the inner diameter of the new seal with MERCON Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent Ford specification MERCON.





4. Using the special tools, install the pinion flange.
^ Apply Thread lock 262E2FZ-19554-B or equivalent meeting Ford specification WSK-M2G35I-A6 to the threads of the pinion flange locknut.

All vehicles
5. Install the driveshaft.

pro multis · About Operation CHARM