Pivot Arm-Rear

REMOVAL







CAUTION: Use a shop towel or similar device to protect the vehicle finish when performing the procedure.

1. Disconnect the rear washer hose.







2. Remove rear pivot arm.
1 Lift the pivot arm nut cover.
2 Remove the nut.
3 Remove the pivot arm.

INSTALLATION







1. Turn the rear wiper switch on and allow the motor to operate for at least one cycle.







2. Turn the rear wiper switch OFF.

NOTE: This step ensures that the wiper motor is in the park position.







3. Position the wiper blade outside the wiper arm stop.







4. Install the wiper pivot arm onto the wiper motor.
^ Tighten retaining nut.







5. Connect the washer hose.







6. Cycle the wiper motor one time to allow the wiper arm to park on the wiper arm stop.