Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2001 >> Explorer Sport 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Heating and Air Conditioning >> Housing Assembly HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Housing Assembly HVAC: Service and Repair


REMOVAL
1. Prepare the vehicle for plenum chamber removal.
1 Remove the dash board. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal and Installation, Service and Repair

2 Remove the A/C evaporator housing, please refer to Heating and Air Conditioning/Evaporator Case/Service and Repair/ Service and Repair
3 Remove the Powertrain Control Module (PCM), please refer to Powertrain Management/Computers and Controls/Engine Control Module/Service and Repair/ Service and Repair






2. Remove the PCM heat sink.
1 Remove the ground strap screw.
2 Remove the PCM heat sink






3 Remove the four nuts and the plenum chamber.

NOTE: To ease the removal of the plenum chamber, first remove the nut located at the center of the dash panel behind the engine cylinder block.

INSTALLATION
1. To install, reverse the removal procedure.
pro multis · About Operation CHARM