Connecting Rod
| Clearance to Crankshaft-Desired | 0.027-0.069 mm | |
| Clearance to Crankshaft-Allowable | 0.027-0.069 mm | |
| Bearing Wall Thickness (STD) | 2.44-2.452 mm | |
| Piston Pin Bore Diameter | 21.959-21.979 mm | |
| Crankshaft Bearing Bore Diameter | 56.756-56.876 mm | |
| Length (Center-to-Center) | 150.7 mm | |
| Alignment (Bore-to-Bore Max. Diff.) | Twist The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | 0.050 mm per 25 mm |
| Bend | 0.038 mm per 25 mm | |
| Side Clearance (Assembled to Crank) | Standard | 0.015-0.45 mm |
| Service Limit MAX | 0.05 mm |