Connecting Rod
| Connecting Rod Journal | Diameter | 52.983-53.003 mm |
| Length | Center-to-Center | 150.7 mm |
| Alignment (Bore-to-Bore Max. Diff.) | Twist Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | 0.050 mm per 25 mm |
| Bend Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | 0.038 mm per 25 mm | |
| Side Clearance (Assembled to Crank) | Standard | 0.125 mm-0.475 mm |
| Service Limit | 0.50 mm | |
| Crankshaft Bearing Bore Diameter | 56.866-56.886 mm | |
| Pin Bore Diameter | 22.012-22.024 mm |