Cowl Moulding / Trim: Service and Repair

COWL-VENT GRILLE

Removal and Installation
1. Remove the windshield wiper arms.







2. Remove the radio antenna mast.
- Lift upward on cover.







3. Remove the cowl top vent panel retaining screws.
4. Raise the hood (16612).







5. Disconnect the windshield washer hose.







6. Remove the cowl panel weatherstrip.







7. Remove and discard the cowl top vent panel pushpins.







8. NOTE: Remove the cowl top vent panel from the center to avoid damage to the locating pins at each outer end of the cowl panels.

Raise the cowl top vent panel.

9. Remove the cowl top vent panel.
10. To install, reverse the removal procedure.