Body Support - Rear, Crew Cab, Lower

BODY SUPPORT-REAR, CREW CAB, LOWER

Removal
1. Remove the rear door scuff plate.
2. Remove the rear seat.
3. If equipped, remove the utility tray from behind the rear seat.
4. Pull the carpet or mat back to expose the lower body insulator bolt head.







5. Remove and discard the bolt.







6. Remove the insulator.

Installation

NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.







1. NOTE: No lubricants of any kind are to be used during body insulator installation.

Follow the removal procedure in reverse order.