Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2002 >> Excursion 2WD V10-6.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Rear >> Brake Caliper Anchor Plate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Anchor Plate

Brake Caliper Anchor Plate

Removal
1. Remove the brake pads.





2. NOTE: Forward-of-axle rear disc brake caliper anchor plates are mounted using stud bolts.

Remove the bolts and the rear disc brake caliper anchor plate.

Installation





F-250/350
1. Position the rear disc brake caliper anchor plate. Install the bolts.





F-450/550 with rear-of-axle brake calipers
2. Position the rear disc brake caliper anchor plate. Install the bolts.





F-450/550 with forward-of-axle brake calipers
3. Position the rear disc brake caliper anchor plate. Install the bolts.
- Tighten the bolts in the sequence shown in three stages.
- Stage 1: Tighten bolt 1 to 400 Nm (295 ft. lbs.).
- Stage 2: Using a suitable crowfoot socket, tighten bolt 2 to 136 Nm (100 ft. lbs.).
- Stage 3: Mark the rear disc brake caliper anchor plate and bolt2. Tighten bolt 2 an additional 1/8 to 1/4 turn.

All vehicles
4. Install the brake pads.
pro multis · About Operation CHARM