Front Case Bushings

Front Case Bushings





Part 1 of 2





Part 2 of 2

Special Tool(s)

Disassembly





1. Using the special tools, remove the front case bushing.

Assembly





1. NOTE: The front case bushing has three lube grooves. The rear case bushing has one lube groove.

Install the front case bushing onto the special tool.





2. Place the special tool with the front case bushing through the case and into the rear case bushing.





3. CAUTION: Make sure the bushing and tool are centered in the bore.

Install the special tool then, install the washer and the nut hand-tight.





4. Hold the special tool while turning the nut until the front case bushing is fully seated. Remove the tools.