Horn: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the tire and wheel.







3. Loosen the front bumper cover.
1 Remove the pin-type retainer.
2 Remove the bolts.







4. Remove the inner fender splash shield screw.
1 Pull the bumper cover down.
2 Remove the screw.







5. Remove the inner fender splash shield.
1 Remove the pin-type retainers.
2 Remove the bolts.







6. Remove the horn and bracket.
1 Disconnect the electrical connector.
2 Remove the bolt and nut.

INSTALLATION
1. To install, reverse the removal procedure.