Vanity Lamp: Service and Repair
REMOVAL1. Disconnect the battery.
2. Remove the A-pillar trim panel.
^ Carefully remove the A-pillar trim panel away from the A-pillar.
3. Partially remove the front door weatherstrip and front door seal.
^ Carefully position the front door weatherstrip away from the A-pillar and roof panel.
4. Remove the sun visor trim panel.
^ Use a flat-bladed tool to carefully position the trim panel away from the sun visor.
5. Lower the sun visor.
^ Carefully position the sun visor away from the headliner and pinch clips.
6. Remove the sun visor.
^ Disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.